Features:

• The ROVIC philosoply is focussed on conservation agriculture, and SYNCROFLOW^® technology is used in the design of the ROVIC EVENFLOW^® orchard sprayer, the following objectives to be achieved:
  • The AIR MOMENTUM generated by the fan system must be balanced with the tree structure and spraying speeds used in industry to supply the whole tree structure with spray-laden air without undue losses due to spraying through the target volume
  • The AIR VELOCITY PROFILES generated must be balanced with the tree structure and dimensions to facilitate reach to all target areas without oversupply of air speed in the lower outside areas, resulting in blowing active off the target
  • The LATERAL BALANCE (left/right) of AIR MOMENTUM and AIR VELOCITY PROFILES must be achieved to ensure even results on both sides of the sprayer
  • The ANGLE OF IMPACT on the tree structure by the air momentum must not be perpendicular, but at an angle, to facilitate improved catch efficiency on the target
  • The amount of ENERGY consumed in this process must be as low as possible to support minimum carbon footprint and reduced cost of operation

Specifications

• 1500/2000/3000 litre Polyethylene tank with 5% additional foam capacity, dual filling lids and integrally moulded tunnel for drive shaft
• Hand wash tank (10 litre) and clean water system rinse tank (150 litre)
• Two tank level indicators, front scaled on indicator
• Class 6 Constant Velocity (CV) PTO shaft
• Adjustable drawbar with free rotational tow eye and heavy duty height-adjustable stand jack
• COMET APS 145 Diaphragn pump (50 Bar, 145 l/min)
• Electrical control valves for open/close, left and right
• Full size calibration pressure gauge on rear spray booms
• Adjustable width axle with 10.0/75-15.5 x 10PR tyres
• 11 x Roll over brass nozzle holders per side, ALBUR ATR Nozzles fitted to specification
• SYNCROFLOW^® Technology inside
• EVENFLOW^® Turret in Stainless Steel
• EASS^® Easy Access Service System
• BELLYPLATE Protection